250-3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V

250-3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V

Availability: In stock

Minimum Length: 1 FT.
Maximum Length: 1000000 FT.

Specification

Gauge Conductor          250      
Conductor Strands            67
Conductor Insulation         .115'
Grounding Cond. Size           1/0
Grounding Cond. Strands           19
O.D. (Inches)         2.25'
New Weight lb/1000FT        4780  lbs    
AMPs         355

Details

Applications:

American Mustang Type MP-GC cables are designed for use with stationary horizontal HV mine power distribution circuits. It can be use for permanent or semi-portable applications with power transmission in deep mines, strip mines, open pits, and tunnels. The cable can be used in wet or dry locations, installed in conduit or duct, (not to exceed maximum rated voltage), and suitable for direct burial applications.

Construction:

American Mustang Type MP-GC cables have compacted annealed copper conductors covered by an extruded semi-conductive shield. The conductors are insulated with a flame resistant cross-linked polyethylene (XLP). The insulation shield consist of a extruded semi-conductor covered by helically applied 3 mil copper tape with a 1/2 overlap. The cable has two copper bare ground wires and one yellow heavy duty EPR insulated ground check. Non-wicking fillers are used to maintain a balanced round cross section and a tight cable assembly. A woven nylon polyester reinforcement binder is applied over the completed assembly for added core to jacket integrity. The outer jacket is made with a flame retardant PVC.   

Specifications:

  • ATSM B-3, B-8 and B-496
  • MSHA P-136
  • UL
  • CSA
  • ICEA s-75-381/ NEMA WC-58

Write Your Own Review

You're reviewing: 250-3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Value