250-3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V
|Grounding Cond. Size||1/0|
|Grounding Cond. Strands||19|
|New Weight lb/1000FT||4780 lbs|
American Mustang Type MP-GC cables are designed for use with stationary horizontal HV mine power distribution circuits. It can be use for permanent or semi-portable applications with power transmission in deep mines, strip mines, open pits, and tunnels. The cable can be used in wet or dry locations, installed in conduit or duct, (not to exceed maximum rated voltage), and suitable for direct burial applications.
American Mustang Type MP-GC cables have compacted annealed copper conductors covered by an extruded semi-conductive shield. The conductors are insulated with a flame resistant cross-linked polyethylene (XLP). The insulation shield consist of a extruded semi-conductor covered by helically applied 3 mil copper tape with a 1/2 overlap. The cable has two copper bare ground wires and one yellow heavy duty EPR insulated ground check. Non-wicking fillers are used to maintain a balanced round cross section and a tight cable assembly. A woven nylon polyester reinforcement binder is applied over the completed assembly for added core to jacket integrity. The outer jacket is made with a flame retardant PVC.
- ATSM B-3, B-8 and B-496
- MSHA P-136
- ICEA s-75-381/ NEMA WC-58