4 Mercer Single Aluminum Conductor 600V URD

4 Mercer Single Aluminum Conductor 600V URD

4 Mercer Single Aluminum Conductor 600V URD


Availability: In stock

Min Length: 1 FT
Max Length: 1000000 FT
Regular price
Sale price
Quantity must be 1 or more

Enter the required footage in the Quantity box


Allowable Ampacity for 4 Mercer Single Aluminum Conductor 600V URD: 120 Amps


The Aluminum 600V URD is designed to serve in the secondary distribution circuits for power. In these secondary circuits, the cable is installed in duct or direct burial applications. Due to its versatility, conductor strength, and insulation integrity, it works well for these outdoor applications. It is also used in wet and dry places since the cable has a maximum operating temperature of 900°C. The cable is also designed to provide an option of pre-pulling into ducts.

Also Known As:

Aluminum urd cable, urd direct burial cable, direct burial electrical cable, direct burial power cable, aluminum direct burial cable, southwire urd.


Aluminum 600V URD is approved to meet design, production and application standards. The following are some of the standard it has met:

  • Approved by ICEA S-105-692

  • ASTM B-609

  • ASTM B-230

  • Accepted by RUS



This is an aluminum conductor cable. The conductor is designed in two forms: either concentric strand or compressed. The stranded type tends to be more flexible compared to the compressed series of aluminum conductors. The 1350-H19 series of compressed aluminum conductors are suitable for applications where flexibility is overlooked and cable rigidity is guaranteed.


Aluminum 600V URD cable has black resistant cross-linked polyethylene (XLP) insulation. The conductors are normally cabled together with XLP insulated aluminum ground or bare copper ground and covered with reinforced binder tape. XLP insulation is tough and resistant to impact, abrasion, chemicals, acids, oils, industrial solvents, and changes in weather.


  • Conductor size: 4

  • Nominal Insulation (mils): 60

  • Approx. O.D. Inches: 0.345

  • Estimated Weight lbs./1000ft: Aluminum: 39

  • Total Weight lb/1000FT: 63 lbs

  • Ampacity: 120 Amps


Aluminum 600V URD cable is designed for use in secondary distribution circuits, where installed in duct or direct burial applications. Maximum operating temperature is not to exceed 90°C in wet and dry locations. Voltage rating is 600 volts. As an option, this cable can provided pre-pulled into duct.


Aluminum 600V URD cable has a concentric strand or compressed 1350-H19 series aluminum conductor.


Aluminum 600V URD cable has a black cross linked polyethylene (XLP) insulation.


  • ASTM B-230 
  • ASTM B-609 
  • ICEA S-105-692 

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.