600 Duke Single Aluminum Conductor 600V URD

600 Duke Single Aluminum Conductor 600V URD

600 Duke Single Aluminum Conductor 600V URD


Availability: In stock

Min Length: 1 FT
Max Length: 1000000 FT
Quantity must be 1 or more

Enter the required footage in the Quantity box


600 Duke Single Aluminum Conductor 600V URD

Allowable Ampacity for 600 Duke Single Aluminum Conductor 600V URD: 510 Amps


The Aluminum 600V URD is designed to serve in the secondary distribution circuits for power. In these secondary circuits, the cable is installed in duct or direct burial applications. Due to its versatility, conductor strength, and insulation integrity, it works well for these outdoor applications. It is also used in wet and dry places since the cable has a maximum operating temperature of 900°C. The cable is also designed to provide an option of pre-pulling into ducts.

Also Known As:

600 duke aluminum urd cable, 600 duke urd direct burial cable, 600 duke direct burial electrical cable, 600 duke direct burial power cable, 600 duke aluminum direct burial cable, 600 duke single conductor wire, 600 duke southwire urd.


Aluminum 600V URD is approved to meet design, production and application standards. The following are some of the standard it has met:

  • Approved by ICEA S-105-692

  • ASTM B-609

  • ASTM B-230

  • Accepted by RUS



This is an aluminum conductor cable. The conductor is designed in two forms: either concentric strand or compressed. The stranded type tends to be more flexible compared to the compressed series of aluminum conductors. The 1350-H19 series of compressed aluminum conductors are suitable for applications where flexibility is overlooked and cable rigidity is guaranteed.


Aluminum 600V URD cable has black resistant cross-linked polyethylene (XLP) insulation. The conductors are normally cabled together with XLP insulated aluminum ground or bare copper ground and covered with reinforced binder tape. XLP insulation is tough and resistant to impact, abrasion, chemicals, acids, oils, industrial solvents, and changes in weather.


  • Conductor size: 600

  • Nominal Insulation (mils): 110

  • Approx. O.D. Inches: 1.060

  • Estimated Weight lbs./1000ft: Aluminum: 562

  • Total Weight lb/1000FT: 697 lbs

  • Ampacity: 510 Amps

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.