Benefits:

• Suitable for outdoor applications
• Wide choice of standardized lengths and individual cuts

Application range:

• For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
• Dry or damp rooms that are subject to medium mechanical loads
• Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
• In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm²
and 2 to 7 conductors
• Suitable for outdoor applications

Product features:

• Flame-retardant according IEC 60332-1-2
• Good chemical resistance, see catalogue appendix T1
• Oil-resistant according to DIN EN 50290-2-22 (TM54)
• UV and weather-resistant according to ISO 4892-2

Norm references / Approvals:

• VDE reg. no. 7030 for the following sizes:
• up to 2.5 mm²: 2 - 65 cores
• from 4 mm²: 2 - 7 cores
• from 25 mm²: 2 - 5 cores

Product Make-up:

• Fine-wire strand made of bare copper wires
• PVC insulation LAPP P8/1
• Cores twisted in layers
• PVC outer sheath, black (RAL 9005)

Technical Data:

• Classification ETIM 5: ETIM 5.0 Class-ID: EC000104
                                            ETIM 5.0 Class-Description: Control cable

• Classification ETIM 6: ETIM 6.0 Class-ID: EC000104
                                            ETIM 6.0 Class-Description: Control cable

• Core identification code: Black with white numbers acc. to VDE 0293-1

• Conductor stranding: Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5

• Torsion movement in WTG: TW-0 & TW-1, refer to Appendix T0

• Minimum bending radius: Occasional flexing: 10 x outer diameter
                                                     In power chains: 15 x outer diameter
                                                     Fixed installation: 4 x outer diameter

• Nominal voltage: U0/U: 300/500 V

• Test voltage: 4000 V

• Protective conductor: G = with GN-YE protective conductor
                                             X = without protective conductor

• Temperature range: Occasional flexing: -15°C to +70°C
                                          In power chains: -5°C to +70°C
                                          Fixed installation: -40°C to +80°C

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.