Price (Per FT.)
To be used in power circuits rated up to 15,000 volts. For installation in open air, duct, conduit, cable tray (1/0 and larger) or direct buried and for use in wet or dry locations. UL approved at 105°C for continuous operation, 140°C for emergency overload and 250°C during short circuit conditions.
Soft bare 1350 series aluminum, Class B stranding per ASTM
Heat and moisture resistant natural high dielectric strength EPR-based insulation per ICEA S-97-682 with a semi-conducting thermosetting insulation shield
Helically applied non-magnetic 5mil copper tape with a minimum of 25% overlap
Sunlight resistant black PVC rated 90°C per UL 1277.
- IEEE 383 flame test (1/0 and larger)
- IEEE 1202 flame test (250MCM and larger)
- UL 1072 type MV-105, sunlight resistance
- CT use (1/0 and larger)
- AEIC CSB
Frequently Asked Questions - Aluminum conductor 15kv mv105
What are the temperature specifications of the Aluminum conductor 15kv mv105?
The Aluminum conductor 15kv mv105 can be used continuously at 105°C. It can withstand 140°C when it is a case of emergency overload and even 250°C for short circuit conditions.
What are the common applications that the Aluminum conductor 15kv mv105 is used for?
This cable is suitable for both wet and dry locations where direct burial is required. It can also be installed in underground ducts and open air. It can be used in power circuits that require15,000 volts or less.
What is the advantage of using aluminum conductor for this cable?
Aluminum conductors are light weight when compared to copper cables. It is easier and more flexible to work with which greatly improves the job efficiency. Aluminum conductors are preferred for use in great distances as iteasy to install and maintain. Copper conductors of the same specifications would require more support for the cable to be secured.
Do I have to be worried about “cold creep” when I use this aluminum conductor?
“Cold creep” or “cold flow” is the instance where the elasticity of the conductor is affected slowly over a period of time. Usually the conductor expands when it is warm and contracts when it is cold. However, with each warm and cool cycle, there is a reduction in the tightness of the wiring which may result in loose connections. However, this phenomenon can be reduced when the wires are installed properly and with regular maintenance.
How is the Aluminum conductor 15kv mv105 constructed?
It comes with 1350 series Aluminum for the conductor with Class B stranding as per ASTM standards. When it is mentioned 15kv, then the cable would require a shield. The insulation can be EPR-based in accordance with ICEA S-97-682 and it has semi-conducting properties. Finally, it is covered with either a PVC or an EPR jacket.
What does the “MV” stand for inAluminum conductor 15kv mv105?
MV stands for medium voltage which is in accordance with UL 1072. MV cables are generally used as the primary power feeder in all kinds of commercial and electrical projects. MV cables can be used in both wet and dry locations.
What are the various factors that the cable is resistant to?
The Aluminum conductor 15kv mv105has a sunlight resistant jacket and a heat and moisture resistant insulation. The cable has passed the IEEE 383 flame test and the IEEE 1202 flame test.