ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%
Specification

Application:

Aluminum Conductor 35KV URD cable is primary used for underground distribution, in direct burial or installed in conduit. 35KV URD cable is suitable for use in wet or dry locations. URD cable is to be used at 15,000 volts or less and not to exceed 90°C temperature in normal use.

Conductors:

Aluminum Conductor 35KV URD cable has a solid or compressed concentric strand soft drawn 1350 series
aluminum conductor per ASTM.

Conductor Shield:

Aluminum Conductor 35KV URD cable has an extruded thermoset semiconducting shield, which is free stripping from the conductor and bonded to the insulation.

Insulation:

Aluminum Conductor 35KV URD cable has naturally high dielectric strength TR-XLPE insulation. There is also extruded thermoset semiconducting insulation shield. Optional EPR insulation is available upon request.

Metallic Shield:

Aluminum Conductor 35KV URD cable has a concentric neutral shield consisting of solid bare copper wires helically applied and uniformly spaced over the insulation shield.

Jacket:

Aluminum Conductor 35KV URD cable has a black jacket of linear lows density polyethylene (LDPE), which is sunlight, abrasion and heat resistant. The jacket has 3 red stripes, the NESC lightning bolt and sequential footage markings.


Standards:

  • ASTM B-3, B-8, B230, B-231, B-609 
  • ANSI/ICEA S-94-649 
  • AEIC CS-8 
  • RUS ACCEPTED 
  • For 90°C continuous, 130°C emergency and 250°C short-circuit operation
  Product Name
Length
Price (Per FT.)
 
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

1/0 SOLID ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

1/0 STRANDED ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

2/0 STRANDED ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

3/0 STRANDED ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

4/0 STRANDED ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

250 STRANDED ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing
ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

350 STRANDED ALUMINUM CONDUCTOR 35KV URD - FULL NEUTRAL 100%

FT.
Call 516-472-0650 for pricing

Specification

Application:

Aluminum Conductor 35KV URD cable is primary used for underground distribution, in direct burial or installed in conduit. 35KV URD cable is suitable for use in wet or dry locations. URD cable is to be used at 15,000 volts or less and not to exceed 90°C temperature in normal use.

Conductors:

Aluminum Conductor 35KV URD cable has a solid or compressed concentric strand soft drawn 1350 series
aluminum conductor per ASTM.

Conductor Shield:

Aluminum Conductor 35KV URD cable has an extruded thermoset semiconducting shield, which is free stripping from the conductor and bonded to the insulation.

Insulation:

Aluminum Conductor 35KV URD cable has naturally high dielectric strength TR-XLPE insulation. There is also extruded thermoset semiconducting insulation shield. Optional EPR insulation is available upon request.

Metallic Shield:

Aluminum Conductor 35KV URD cable has a concentric neutral shield consisting of solid bare copper wires helically applied and uniformly spaced over the insulation shield.

Jacket:

Aluminum Conductor 35KV URD cable has a black jacket of linear lows density polyethylene (LDPE), which is sunlight, abrasion and heat resistant. The jacket has 3 red stripes, the NESC lightning bolt and sequential footage markings.


Standards:

  • ASTM B-3, B-8, B230, B-231, B-609 
  • ANSI/ICEA S-94-649 
  • AEIC CS-8 
  • RUS ACCEPTED 
  • For 90°C continuous, 130°C emergency and 250°C short-circuit operation

Details

Aluminum Conductor 35KV URD – Full Neutral 100%

Aluminum Conductor Cable is meant for underground power distributions of 35KV. It is designed with seven strands of aluminum conductors made of 1350 series, which are shielded with an extruded thermosetting semi-conductor. High dielectric strength Tree-Retardant Cross-Linked Polyethylene insulation provides safety for the cable and the handler. The insulating layer is shielded with solid copper wires which are left bare and jacketed with LLDPE for protection.

Standards and Certifications

• ASTM B3, B8, B230, B231, B609
• AEIC CS-8
• RUS accepted
• ANSI/ICEA S - 94-649

Features

• Conductor

Aluminum 35KV URD Conductor Cable is made of a compressed or solid and concentrically stranded 1350 aluminum series. The 1350 series are soft drawn adding to the flexibility of the cable, relieving electricians from using excessive force to wound it into drums for shipment. This 1350 Aluminum series conductor also makes the cable easy to install.

• Conductor Shield     

Conductor shield is the immediate covering layer to the aluminum conductors. The extruded thermosetting semi-conductor shield offers protection and ensures that the conductors are held in their positions hence limiting overlapping. It provides free stripping from conductor during termination and it is bonded to the insulator.

• Insulation

The Aluminum Cable is insulated with a high dielectric strength TR Polyethylene which is cross linked for maximum performance. It is black color coded and semi-conducting thus ensuring safety of the user is not compromised. TR-XLPE protects the cable from the punishing environmental conditions.

• Metallic Shield

A concentric neutral shield instilled with bare copper wires which are helically applied, shields the TR-XLPE insulation reducing mechanical stress.

• Jacket

Linear Low Density Polyethylene (LLDPE) is sunlight resistance, heat resistant and abrasive resistant hence improving the electrical conductivity of the cable and durability.

Applications

It is used in both single and three phase primary underground power distributions to facilities operating at 35KV. The cable is installed through conduits and direct burial in wet and dry locations.

Frequently Asked Questions - Aluminum Conductor 35kv URD

 What does “URD” stand for?

 It means “Underground Residential Distribution wire” and URD wires are usually used for underground residential purposes.

Can the Aluminum conductor 35kv URD be used in wet locations?

Yes, it can. You can also use it for dry locations and for underground distribution also. It can be installed in a conduit or used in direct burial just as easily.  Some of these cables can be used at 35,000 volts or less while others can be used at 15,000 volts or less. They can be used for both three phase or single phase medium-voltage power.

How are the Aluminum conductors made for 35kv URD?

The conductors can be solid or compressed strand which is concentric meeting the ASTM specifications. The conductors are protected with an extruded semi-conducting shield that is thermoset. The shield can be easily removed from the conductor and is actually bonded to the insulation. Next comes the TR-XLPE insulation that has a high dielectric strength. There are two types of conductors available that have 100% and 133% insulation levels.

How is XLPE insulation different from PVC?

PVC is comparatively thinner and is mainly used in LT cables. XLPE, on the other hand, is thicker to withstand higher temperatures induced by higher current volumes in HT cables.   Although XLPE is thicker, the weight is less than PVC with a smaller bending radius. Hence it is easier to install XLPE cables and thus has a lesser installation cost. XLPE also has high dielectric strength with low dielectric loss and gives good chemical resistance.

How can I identify an Aluminum conductor 35kv URD?

The cables have red identification stripes on the polyethylenejacket which is extruded to fill spaces. Sometimes the cables can be without the red stripes in which case you can identify the cable with the surface print on the jacket. There will also be a lightning bolt symbol seen on the jacket.

What is the temperature tolerance for Aluminum conductor 35kv URD?

The cable can work continuously at 90°C and care should be taken that it does not exceed the recommended temperature. 

What are the standards that the Aluminum conductor 35kv URD adheres to?

All our cables are made to industry standards and when they are made for specialized jobs, they adhere to those specifications such as the following as seen in this particular cable

Aluminum Conductor 35KV URD – Full Neutral 100%

Aluminum Conductor Cable is meant for underground power distributions of 35KV. It is designed with seven strands of aluminum conductors made of 1350 series, which are shielded with an extruded thermosetting semi-conductor. High dielectric strength Tree-Retardant Cross-Linked Polyethylene insulation provides safety for the cable and the handler. The insulating layer is shielded with solid copper wires which are left bare and jacketed with LLDPE for protection.

Standards and Certifications

• ASTM B3, B8, B230, B231, B609
• AEIC CS-8
• RUS accepted
• ANSI/ICEA S - 94-649

Features

• Conductor

Aluminum 35KV URD Conductor Cable is made of a compressed or solid and concentrically stranded 1350 aluminum series. The 1350 series are soft drawn adding to the flexibility of the cable, relieving electricians from using excessive force to wound it into drums for shipment. This 1350 Aluminum series conductor also makes the cable easy to install.

• Conductor Shield     

Conductor shield is the immediate covering layer to the aluminum conductors. The extruded thermosetting semi-conductor shield offers protection and ensures that the conductors are held in their positions hence limiting overlapping. It provides free stripping from conductor during termination and it is bonded to the insulator.

• Insulation

The Aluminum Cable is insulated with a high dielectric strength TR Polyethylene which is cross linked for maximum performance. It is black color coded and semi-conducting thus ensuring safety of the user is not compromised. TR-XLPE protects the cable from the punishing environmental conditions.

• Metallic Shield

A concentric neutral shield instilled with bare copper wires which are helically applied, shields the TR-XLPE insulation reducing mechanical stress.

• Jacket

Linear Low Density Polyethylene (LLDPE) is sunlight resistance, heat resistant and abrasive resistant hence improving the electrical conductivity of the cable and durability.

Applications

It is used in both single and three phase primary underground power distributions to facilities operating at 35KV. The cable is installed through conduits and direct burial in wet and dry locations.

• RUS accepted
• AEIC CS-8
• ASTM B-230 (Aluminum, 1350-H19 Wire), B-231 (Aluminum 1350 Conductors), B-609 (Aluminum 1350 Round Wire)
• ANSI/ICEA S-94-649

Write Your Own Review

You're reviewing: ALUMINUM CONDUCTOR 35KV URD – FULL NEUTRAL 100%

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Value
Quality