CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV
Specification

5KV UL Type MV-105, MC-HL, CT Use, 105°C
Shielded, EPR Insulation
100% and 133% Insulation Level
Aluminum Armor
Copper Conductors

Application: 

Mainly used for severe environments where maximum conductor protection is required. Has an armor resistant to water, gas and corrosive elements into the electrical core. Instrumentation and process and control uses of claims commercial and industrial pulp and paper, mining, and petroleum applications. UL permitted for continuous use at 105°C in wet or dry locations, 140°C for emergency overload conditions, and 250°C for short circuit conditions.UL listed, Type MC-HL per UL Standard 2225 for use in Class I, Division I hazardous locations. This cable has an economical alternative to wire in conduit systems due to the waterproof welded corrugated armor cable.

Conductors:

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.

Insulation:

Ethylene propylene rubber (EPR) per ICEA S-97-682/S-93-639 with a semi-conducting insulation shield.

Shield:

Uncoated 5 mil copper tape with a minimum of 12.5% overlap. 

Grounding Conductor:

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1072.

Armor:

Impervious continuously welded and corrugated aluminum.

Jacket:

Yellow flame-retardant and sunlight-resistant PVC.

Flame Tests:

ICEA 70,000 BTU/hr and 210,000 BTU/hr flame test

Additional Standards:

• UL listed, NEC Type MV-105 and Type MC, UL Standard 1072.
• Single conductors are qualified per AEIC CS8.
• UL listed Type CWCMC to IEEE 45/IEEE 1580 (46 CFR Part 111.60-23) Marine Shipboard Cable.
• Meets requirements of CSA-C22.2 No. 0.3, -40°C cold impact test. 

  Product Name
Length
Price (Per FT.)
 
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

6/3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

4/3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

2/3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

1/0-3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

2/0-3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

4/0-3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

250-3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

350-3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing
CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

500-3 CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

FT.
Call 516-472-0650 for pricing

Specification

5KV UL Type MV-105, MC-HL, CT Use, 105°C
Shielded, EPR Insulation
100% and 133% Insulation Level
Aluminum Armor
Copper Conductors

Application: 

Mainly used for severe environments where maximum conductor protection is required. Has an armor resistant to water, gas and corrosive elements into the electrical core. Instrumentation and process and control uses of claims commercial and industrial pulp and paper, mining, and petroleum applications. UL permitted for continuous use at 105°C in wet or dry locations, 140°C for emergency overload conditions, and 250°C for short circuit conditions.UL listed, Type MC-HL per UL Standard 2225 for use in Class I, Division I hazardous locations. This cable has an economical alternative to wire in conduit systems due to the waterproof welded corrugated armor cable.

Conductors:

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.

Insulation:

Ethylene propylene rubber (EPR) per ICEA S-97-682/S-93-639 with a semi-conducting insulation shield.

Shield:

Uncoated 5 mil copper tape with a minimum of 12.5% overlap. 

Grounding Conductor:

Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1072.

Armor:

Impervious continuously welded and corrugated aluminum.

Jacket:

Yellow flame-retardant and sunlight-resistant PVC.

Flame Tests:

ICEA 70,000 BTU/hr and 210,000 BTU/hr flame test

Additional Standards:

• UL listed, NEC Type MV-105 and Type MC, UL Standard 1072.
• Single conductors are qualified per AEIC CS8.
• UL listed Type CWCMC to IEEE 45/IEEE 1580 (46 CFR Part 111.60-23) Marine Shipboard Cable.
• Meets requirements of CSA-C22.2 No. 0.3, -40°C cold impact test. 

Details

Continuously Welded Armor Cable MV-105 MC-HL Shielded EPR Insulation 5Kv

The 5KV armored Typr MV MC-HL cable is a high voltage conductor heavily shielded with 100% insulation system. Type MV-105 is one suitable instrumentation and control cable for you. It has various mechanical and electrical properties weaved together to get you and excellent cable.

• Conductor

It is constructed using copper conductor which is the leading and best conductor. This conductor is always soft and annealed making it easier to bend and straighten during wiring and installation. A grounding conductor sized according to UL 1072 is also part of the construction.

• Insulation

Ethylene propylene rubber (EPR) is extensively used in the insulation construction of the cable. This insulation is done according to ICEA S-97-682/s-93-639 and often comes with a semi- conductor insulation shield. All these features are put together to ensure the conductors are safe from destruction.

• Shield

Being a control and instrumentation cable, data integrity is vital and the cable shield helps to achieve that. It is a 5 mil copper tape with around 13% overlap. It keeps all the interferences away.

• Applications

Type MV-105 armored cable is suitable for severe environments where adequate security for both a system and conductors are needed. Since it is well armored, it can serve in various industrial process where water, gas and corrosive elements are frequent. The top notch designed cable doesn’t only serve in power transmission and distribution, it is also used to wire various control applications for mining, pulp, paper and petroleum systems.

The cable is also used in instrumentation processes of various industrial and commercial applications like mining, paper and petroleum industries. It is able to tolerate high and extreme temperature operations in both dry and wet locations.

Write Your Own Review

You're reviewing: CONTINUOUSLY WELDED ARMOR CABLE MV-105 MC-HL SHIELDED EPR INSULATION 5kV

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Value
Quality