Price (Per FT.)
2-15 KV. Tinned Copper Conductors
EPR Insulation. Tinned Copper Braid Shield.
Heavy Duty CPE Jacket. –50° C to 90° C
14 AWG-500 kcmil.
American Mustang Type SHD-GC cables are designed for use with mobile or stationary mining equipment, continuous mining machines or longwall loading machines, blast hole drillers, heavy duty trailing cable where maximum protection is required. Also for medium and high voltage use on shovels, draglines, dredges, and cranes. This cable is also suitable for power distribution inmines where more flexibility is desired. The cable can also be used where a ground check conductor is required for fail-safe monitoring.
American Mustang Type SHD-GC cables have soft drawn annealed, flexible rope lay,tinned copper conductors wrapped with a semi-conductive tape (5-25 kV). The conductors are insulated with EPR, covered by a nylon semi conductive tape (5-25 kV) with a tinned copper braided insulation shield, 85% minium coverage. ( A Mylar separator is used between the phase conductor and insulation, SBR tape separates the copper ground wires and one HD EPR coated ground check. The outer jacket provides a moderate fill of the cable assembly, (nylon core rubber fillers applied as needed for balanced round cross section). The SBR tape is applied over the entire cabled assembly aiding core stability, and jacket strip ability. The outer jacket is black flame resistant, heavy-duty single pass CPE, which has excellent resistance to UV, oil, water, solvents, corrosives, cuts, tears, and abrasion.
Type SHD-GC cables comply with:
- ASTM B-33 and B-172
- MSHA P-136
- ICEA S-75-381/ NEMA WC-58
Type SHD-GC Mining Industrial Cable 2000-5000V
American Mustang Type SHG-GC cable is designed with softly drawn and annealed copper conductors. Since bare copper wire has the high affinity to corrosive agents, it is tinned to protect it from corrosion. Annealing of the copper makes the conductor highly flexible, however they are wrapped together with a semi-conductive tape to improve cable integrity.
EPR provides a sturdy insulation to the cable conductors. This insulation is also covered using nylon semi conductive tapes. Besides, an insulation shield made from tinned, braided copper offers reinforcement to the whole cable. There key features of this cable construction, they include:
- Mylar Separator in between the phase conductor and insulation helps in putting a separation.
- SBR tapes help in separating copper ground and the EPR insulated ground check wire.
A strong outer jacket provides overall security and also instills a fill for the cable assembly. Fillers like nylon core rubber are important as far as round cross section balance for conductors is needed. This jacket is flame resistant, has excellent resistance to oil, water, solvents, corrosives, tears, cuts, UV and abrasion. It is generally heavy duty designed with a single pass CPE
Type SHS-GC American Mustang is made for special functions, wiring the control systems for both highly mobile and stationary equipment used in the mines. Due to its strength, it is also used for continuous mining machineries and long wall loading equipment. It is a heavy duty cable used for wiring blast-hole drillers where high system protection is required. Type SHS-GS cable supports distribution of medium and high voltage used in dredges, shovels and cranes. Due to its flexibility, the cable is generally suitable in mining activities for power distribution. It also helps as ground check conductor in order to establish fail-safe checking.