INDUSTRIAL SINGLE PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE

INDUSTRIAL SINGLE PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE
Specification

APPLICATION:
Superior flame-retardant cable for use in thermocouple extension applications in caustic environments where protection from electrostatic interference is required. UL listed as Type TC and approved for installation indoors or outdoors, aerially, in conduits, ducts and cable trays. May be installed at temperatures as low as -35°C and used in NEC Class 1, Division 2 hazardous locations.

CONDUCTORS:
Annealed, solid thermocouple extension grade alloys calibrated to standard limits of error per ANSI-MC96.1

INSULATION:
Flame-retardant ethylene propylene rubber (FR-EP) color coded per ANSI-MC96.1. Flame-retardant cross-linked polyethylene per ICEA S-66-524

INDIVIDUAL SHIELD:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

COMMUNICATION WIRE:
Multipair constructions contain a bare copper orange PVC-insulated communication wire

OVERALL SHIELD:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

JACKET:
Sunlight-resistant chlorinated polyethylene (CPE) color coded per ANSI-MC96.1. A ripcord is applied longitudinally under the jacket to facilitate stripping

FLAME TESTS:
• IEEE 383 (70,000 BTU/hr) Flame Test
• IEEE 1202 (70,000 BTU/hr)
• UL Standard 13 (70,000 BTU/hr) Flame Test
• CSA FT4 Flame Test

  Product Name
Length
Price (Per FT.)
 
INDUSTRIAL SINGLE PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE

16 AWG 1 PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE

FT.
Call 516-472-0650 for pricing
INDUSTRIAL SINGLE PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE

20 AWG 1 PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE

FT.
Call 516-472-0650 for pricing

Specification

APPLICATION:
Superior flame-retardant cable for use in thermocouple extension applications in caustic environments where protection from electrostatic interference is required. UL listed as Type TC and approved for installation indoors or outdoors, aerially, in conduits, ducts and cable trays. May be installed at temperatures as low as -35°C and used in NEC Class 1, Division 2 hazardous locations.

CONDUCTORS:
Annealed, solid thermocouple extension grade alloys calibrated to standard limits of error per ANSI-MC96.1

INSULATION:
Flame-retardant ethylene propylene rubber (FR-EP) color coded per ANSI-MC96.1. Flame-retardant cross-linked polyethylene per ICEA S-66-524

INDIVIDUAL SHIELD:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

COMMUNICATION WIRE:
Multipair constructions contain a bare copper orange PVC-insulated communication wire

OVERALL SHIELD:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire

JACKET:
Sunlight-resistant chlorinated polyethylene (CPE) color coded per ANSI-MC96.1. A ripcord is applied longitudinally under the jacket to facilitate stripping

FLAME TESTS:
• IEEE 383 (70,000 BTU/hr) Flame Test
• IEEE 1202 (70,000 BTU/hr)
• UL Standard 13 (70,000 BTU/hr) Flame Test
• CSA FT4 Flame Test

Details

Industrial Single Pair TX Overall Shield Cable

Industrial Single Pair TX shield cable is made of annealed copper conductors which are insulated by the thermoplastic ethylene propylene rubber (EPR). The conductors are individually shielded with an aluminum polymer tape that offers 100% coverage. A seven stranded draining wire is laid on the conductors and wrapped with an overall shield. The cable has a tough jacketing layer made of CPE.

• Conductor

Annealed copper conductors are soft, malleable and lightweight. This adds to the lightweight aspect of this Type TX Thermocouple Cable. Annealing is the process of heating copper conductors and allowing them to cool into a more soft and malleable electrode, without losing its good electrical conductive properties. Soft conductors easily succumb to bending and are folderable without using excessive effort. You need lightweight Thermocouple cables, which can be lifted and moved around for shipment and installation.

• Compliance

a) Flame test IEEE 383
b) IEEE 1202
c) UL Standard 13
d) CSA FT4 flame test

• Insulation

Ethylene Propylene Rubber is non-conducting and will ensure the safety of the user is not compromised when handling the cable. This is because it doesn’t conduct electric current. The EPR is lightweight and flexible enough to enhance installation. It is color coded for easy identification and protects the cable form harsh environmental conditions.

• Jacketing

The Chlorinated Polyethylene jacketing is sunlight resistant; this improves the service life of Type TX Thermocouple Wire. CPE is color coded in accordance to ANSI-MC96.1. A ripcord is longitudinally applied under the CPE jacketing for free stripping.

Applications

Type TX Thermocouple Wire is a superior flame resistant cable, which is meant for use in thermocouple extensions in caustic environments such as:

a) Petrochemical firms
b) Heating machines
c) Motor engines

It is installed through conduits, cable trays, aerial and ducts.

Write Your Own Review

You're reviewing: INDUSTRIAL SINGLE PAIR TYPE TX OVERALL SHIELDED THERMOCOUPLE EXTENSION CABLE

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Value