Price (Per FT.)
Okoguard Shielded Okolon TS-CPE power cables are recommended for use as feeder circuits in utility generating plants, in distribution applications and for primary circuits in all industrial and commercial installations.
These cables may be installed in wet or dry locations, indoors or outdoors (exposed to sunlight), in any raceway or underground duct, directly buried, or messenger supported.
Okoguard is Okonite's registered trade name for its exclusive ethylene-propylene rubber (EPR) based, thermosetting compound, whose optimum balance of electrical and physical properties is unequaled in other solid dielectrics. Okoguard insulation, with the distinctive red color and a totally integrated EPR system, provides the optimum balance of electrical and physical properties for long, problem free service.
The triple tandem extrusion of the screens with the insulation provides optimum electrical characteristics.
The Okolon TS-CPE jacket on this cable is a vulcanized chlorinated polyethylene based compound which is mechanically rugged, flame, radiation, and oil resistant
Central Conductor: Annealed uncoated compact copper Class B stranded per ASTM B-496.
Conductor Screen: Extruded semiconducting EPR strand screen. Meets or exceeds the electrical and physical requirements of ICEA S-97-682, AEIC CS8.
Insulation: Meets or exceeds electrical and physical requirements of ICEA S-97-682, AEIC CS8.
Insulation Screen: Extruded semiconducting EPR insulation screen applied directly over the insulation. Meets or exceeds electrical and physical requirements of ICEA S-97-682 and CS8.
Concentric Conductor: Coated 5 mil copper tape helically applied with 25% nominal overlap.
Jacket: Meets or exceeds electrical and physical requirements of ICEA S-93-639 for thermoset chlorinated polyethylene jackets.
- Qualified as Class 1E cable.
- Okoguard cables meet or exceed all recognized industry standards (AEIC, NEMA/ICEA, IEEE).
- 90°C continuous operating temperature.
- 130°C emergency rating.
- 250°C short circuit rating.
- Cables meet the IEEE 383/IEEE 1202 flame test requirement.
- Quality Assurance traceability
- Excellent corona resistance.
- Radiation resistant.
- Screens are clean stripping.
- Exceptional resistance to “treeing”.
- Moisture resistant.
- Resistant to most oils, acids, and alkalies.