Okoguard Okoseal Type MV-105 15kV Shielded Power Cable - 175 mils

Okoguard Okoseal Type MV-105 15kV Shielded Power Cable - 175 mils
Specification

Applications

Okoguard shielded three conductor Type MV-105 power cables are recommended for distribution circuits, and for feeders or branch circuits in industrial & utility power distribution systems. Type MV cables may be installed in wet or dry locations, indoors or outdoors (exposed to sunlight), in any raceway or underground duct, directly buried, cable tray, or messenger supported in industrial establishments and electric utilities.

Insulation
Okoguard Is Okonite's registered trade name for its exclusive ethylene-propylene rubber (EPR) base, thermosetting compound, whose optimum balance of electrical and physical properties is unequaled in other solid dielectrics. Okoguard insulation, with the distinctive red color and a totally integrated EPR system, provides the optimum balance of electrical and physical properties for long, problem free service.

Assembly
The Type MV-105 conductors are assembled with fillers and a binder tape overall. One bare stranded copper ground conductor is placed in one of the outer interstices.

Jacket
The Okoseal (PVC) jacket supplied with this cable is mechanically rugged and has excellent resistance to oil and most chemicals.

Conductors: Uncoated copper compact stranded per ASTM B-496.
Strand Screen: Extruded semiconducting EPR strand screen meets or exceeds electrical and physical requirements of ICEA S-93-639/NEMA WC74 and UL 1072.
Insulation: Okoguard meets or exceeds the electrical and physical requirements of ICEA S-93-639/NEMA WC74 and UL 1072. The insulated conductors are tested in accordance with AEIC CS8.
Insulation Screen: Extruded semiconducting EPR insulation screen per ICEA S-93-639/NEMA WC74, AEIC CS8 and UL 1072.
Shield: 5 mil uncoated copper tape helically applied with 12.5% nominal overlap.
Phase Identification: Color coded (black, red, blue) polyester ribbon laid longitudinally under the copper shield.
Grounding Conductor: Uncoated copper compact stranded per ASTM B-496 and sized in accordance with UL 1072.
Assembly: Cabled with fillers and ground wire in the interstices, binder tape overall.
Jacket: Meets or exceeds electrical and physical requirements of ICEA S-93- 639/NEMA WC74 and UL 1072 for polyvinyl chloride jackets.
UL Listed as Type MV-105, sunlight resistant for use in cable tray, and for direct burial in accordance with UL 1072.
Cables listed to CSA C68.3 are also available.

Product Features

  • Triple tandem extruded, all EPR system.
  • Complete prepackaged, color coded, factory tested wiring system.
  • Passes the vertical tray flame test requirements of IEEE 383 and UL 1072.
  • Complies with NEC Sections 310-7 and 710-4(b) for direct burial.
  • Excellent corona resistance.
  • Screens are clean stripping.
  • Exceptional resistance to “treeing”.
  • Improved Temperature Rating.

Specification

Applications

Okoguard shielded three conductor Type MV-105 power cables are recommended for distribution circuits, and for feeders or branch circuits in industrial & utility power distribution systems. Type MV cables may be installed in wet or dry locations, indoors or outdoors (exposed to sunlight), in any raceway or underground duct, directly buried, cable tray, or messenger supported in industrial establishments and electric utilities.

Details

Okoguard Okoseal Type MV-105 15kV Shielded Power Cable - 175 mils

This Multi-conductor cable measures 175 Mils. It is a medium voltage power distribution cable, which is designed with an operational voltage rating of 105V. Type MV-105 conductors are compacted with fillers and a binding tape. The cable is insulated, shielded and jacketed for maximum performance.

Conductor

Stranded and compacted copper conductors measures ten feet long. Stranding enhances flexibility of this type of multi-conductor power cable. Flexible Type MV-105 cable is easier to install as compared to stiff and rigid cables. This is because flexible cables require little effort to fold and twist thus facilitating termination process during installation.

Standards and Certifications

Type MV-105 175 Mils cable is approved to meet the following requirements of international organization standards.

• ICEA S-93-639
• ASTM B496
• Underwriters Laboratory (UL) 1072
• NEMA WC74
• AEIC CS8
• CSA C68.3
• IEEE 383
• NEC Sections 310-7 & 710-4(b)

Insulation

Ethylene Propylene Rubber (EPR) is used to insulate this cable. A thermosetting compound that can withstand both wet and dry environmental conditions. EPR offers a superb chemical and mechanical protection for type MV-105 Shielded 175 Mils cable. This makes it withstand corrosive industrial chemicals such as chlorides, and resistance to abrasion, creep and any other deformations. The EPR insulation is also semiconducting and will not subject the user to electric shocks during installation or when handling the cable.

Jacketing

Polyvinyl Chloride jacketing is color coded and corrugated for maximum performance. PVC is a non-biodegradable compound and will not decompose easily even when subjected to direct burial. This improves durability of this cable. The low temperature Polyvinyl Chloride also offers protection from the punishing environmental conditions.

Applications

• Utility power distribution
• Industrial heavy motors

Write Your Own Review

You're reviewing: Okoguard Okoseal Type MV-105 15kV Shielded Power Cable - 175 mils

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Value
Quality