Price (Per FT.)
Okoguard shielded three conductor Type MV-105 power cables are recommended for distribution circuits, and for feeders or branch circuits in industrial & utility power distribution systems. Type MV cables may be installed in wet or dry locations, indoors or outdoors (exposed to sunlight), in any raceway or underground duct, directly buried, cable tray, or messenger supported in industrial establishments and electric utilities.
Okoguard Okoseal Type MV-105 15kV Shielded Power Cable - 220 mils
Type MV-105 Okguard cable is a Medium Voltage multi-conducting power distribution cable, which is designed for a voltage rating of 105V. It has three conductors which have individual insulation. The conductors are shielded by the copper binding tape, which is helically applied. Grounding conductors are bonded to the main conductors and jacketed with a color coded PVC (Polyvinyl Chloride).
Copper conductors are stranded and compacted in accordance to ASTM B496. The copper conductors measure ten feet long. Stranding improves the flexibility aspect of this Type MV-105 power cable and annealing makes it very efficient.
Standards and Certifications
These are rules and regulations set aside by the international organizations standards. The cable is in line with the following standards.
• ASTM B496
• ICEA S-93-639
• NEMA WC74
• AEIC CS8
• Underwriters Laboratory (UL) 1072
• IEEE 383
• National Electrical Code (NEC) Article sections 310-7 & 710-4(b)
Type MV-105 Shielded power cable is insulated with the semi-conducting Ethylene Propylene Rubber. This protects the user from electrocution when handling the cable. EPR also protects the cable form harsh environmental conditions and deformations.The copper conductors are further covered by an extruded semi-conducting Ethylene Propylene Rubber. Insulation screen improves the grounding safety of type mv-90 shielded cable.
This type of Multi-conductor Cable is shielded with 5 mil bare copper tape, which is helically applied with a 12.5% nominal overlap. Shielding provides an additional mechanical protection to Type MV-105 Cable. It prevents direct impulses on the cable.
It is jacketed with polyvinyl chloride in accordance to ICEA S-93-639 requirements. PVC is non-biodegradable and do not succumb to fungal attacks even when subjected to direct burials. This improves the service life of this cable.
The Okoguard Shielded Type MV-105 power cable is designed and manufactured to help in distribution circuits, feeders and branch circuiting. It is used in utility and industrial power systems. This cable can be installed in both wet and dry locations through underground ducts, raceways, direct burial and cable trays.