Price (Per FT.)
Okonite FMR-N Power and Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.
Okonite FMR-N is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged nuclear plant qualified ethylene-propylene insulation compound. Its physical properties and flame retardency permit its use without a jacket on the single conductors.
The properties of Okonite FMR-N insulation substantially enhance the well known features of ethylene propylene rubber insulations.
Nuclear qualified Okonite FMR-N cables meet IEEE Standard - 383 LOCA and flame test criteria.
The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.
Conductors: Tin Coated Copper per ASTM B-33, Class B stranded per ASTM B-8.
Insulation: Okonite FMR-N meets or exceeds the electrical and physical requirements of ICEA S-73-532 & S-95-658.
Color Coding: Base colors and tracers per ICEA Method 1 Table E-1 color sequence shown on reverse of this sheet. Sizes 8 AWG and larger: surface printing of numbers per ICEA Method 4.
Assembly: Conductors cabled using flame and moisture resistant fillers.
Overall Jacket: The Okolon TS-CPE compound meets or exceeds the requirements of ICEA S-73-532 and S-95-658.