Price (Per FT.)
Okonite-FMR Control Cables are recommended for use in either power generating plants and in substations; designed especially for critical circuits where continuity of service is of prime importance. This premium quality control cable is recommended for wet or dry, ac or dc service at conductor temperatures to 90°C. They may be installed in conduits, ducts, cable troughs, trays, messenger supported, or directly buried in the earth.
Okonite-FMR is Okonite’s trade name for its heat, moisture, flame and chemically resistant, mechanically rugged ethylene-propylene insulation compound. It is flame retardant and will pass both the 70,000 BTU/hour and 210,000 BTU/hour tray flame test. Its physical properties and flame retardency permit its use without a jacket on the single conductors thus providing a substantially smaller overall diameter control cable.
The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene propylene rubber insulations.
The overall Okolon TS-CPE jacket is a thermoset chlorinated polyethylene compound. This combination construction assures circuit security because of its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.
Conductors: Coated copper per ASTM B-33, Class B stranded per ASTM B-8.
Insulation: Okonite-FMR meets or exceeds the electrical and physical requirements of ICEA S-73-532.
Color Coding: Base colors and tracers per ICEA Method 1 Table E-1. Sequence shown on reverse of this sheet.
Assembly: Conductors cabled using flame and moisture resistant fillers.
Overall Jacket: The Okolon TS-CPE compound meets or ex- ceeds the requirements of ICEA S-73-532