Price (Per FT.)
Okonite Okozel Type SP-OS (Pair/triad - Individual and Overall Shield) instrumentation cables are recommended for use in either nuclear powered or fossil fueled generating stations where continuity of critical control circuits is of primary importance. Designed for use as instrumentation, process control, and computer cables in ITC non-classified or labeled circuits up to 150 volts and 5 amps (750VA) and in Class 2 or 3 Power-Limited circuits where maximum shielding against external interference is required, as well as shielding among groups, particularly where the cable may be subject to abnormally high current or voltage interference; indoors or outdoors; in wet or dry locations with conductor operating temperatures up to 150°C; in cable trays; in raceways; supported by a messenger wire; under raised floors; for direct burial. Suitable Class I, Division 2; Class II, Division 2; or Class III, Division 2 hazardous locations. Listed for 1E Nuclear Station applications (meets LOCA requirements). Also for use as Power-Limited fire protective signaling cable (FPL) per NEC Code 760.
Okozel instrumentation cables are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations in excess of -65°C (-85°F).
Okozel Type SP-OS, Type ITC/PLTC Thermocouple Extension Cable, Multiple Shielded Pairs - Overall Shield - 150 Deg. C Rating.
Here is another Instrumentation and Control cable, designed with top notch qualities to serve your process control system adequately. The cable is special, since it helps in transmission of data signals. It is therefore designed with adequate features to keep off interferences from the signals being transmitted.
This thermocouple extension cable is constructed using quality copper conductor. Instrumentation involves transmission of high frequency signals and a fast conductor like copper serve right. The conductors are designed into a single pair, with adequate strength and stability.
These tough applications for the cable demand for a sturdy, durable and reliable insulation system. It is designed with a strong insulation system. This insulation keeps off the entry of interferences. It provides mechanical support and acts as a shock absorber. The insulation also has a shielding feature to protect the signals being transmitted from external interference.
OkoniteOkozel Type SP-OS cable is highly recommended for nuclear power and fossil fuel generation stations. In these applications, continuity is vital and this cable has the best properties fit for it. This is an instrumentation and control cable, rated for 150 Volts circuits.
Okozel instrumentation cable is recommended for areas with high ambient temperature or for excess cold weather installations of -650C. And appropriate for cable trays and raceways. It is reinforced using messenger wire, and can be installed under raised floors and direct burial. The cable can also be used as power-limited fire protective signaling cable according to NEC Code 760.