Okozel Type Z

Okozel Type Z
Specification

Applications
Okozel insulated conductors are recommended for use in either nuclear powered or fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLP or rubber constructions.
Okozel conductors are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).

  Product Name
Length
Price (Per FT.)
 

116-75-1411 Okozel Type Z - 14 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1441 Okozel Type Z - 12 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1471 Okozel Type Z - 10 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1491 Okozel Type Z - 8 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1501 Okozel Type Z - 6 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1511 Okozel Type Z - 4 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1521 Okozel Type Z - 2 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1531 Okozel Type Z - 1 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1541 Okozel Type Z - 1/0 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1551 Okozel Type Z - 2/0 - AWG

FT.
Call 516-472-0650 for pricing

116-75-1571 Okozel Type Z - 4/0 - AWG

FT.
Call 516-472-0650 for pricing

Specification

Applications
Okozel insulated conductors are recommended for use in either nuclear powered or fossil fueled generating stations where continuity of service in critical circuits is of primary importance. These conductors, which are rated 150°C in dry and 75°C in wet locations, permit smaller conduit use through higher ampacities and thinner insulation walls than comparable XLP or rubber constructions.
Okozel conductors are also recommended for high ambient temperature areas up to 150°C (302°F) in industrial applications or for cold weather installations to -65°C (-85°F).

Details

Insulation
Okozel is Okonite’s trade name for ETFE Fluoropolymer, a modified Ethylene Tetrafluoroethylene. Okozel is extremely rugged with excellent resistance to cut-through and abrasion. It is chemically inert and has low permeability. Okozel is flame retardant and non-propagating, passes the IEEE 383 and UL vertical tray flame test, and is rated “non-burning” under ASTM D635. It is rated for 150°C (302°F) conductor operating temperature for continuous use and retains alluseful physical properties at temperatures down to -100°C (-148°F).

Specifications
Conductor:Uncoated soft copper per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.
Insulation:Flame-retardant, radiation resistant Okozel, a modified ETFE Fluoropolymer per NEMA Std. HP-100.2. Insulated conductor is rated “non-burning” under ASTM D635.
Listed by Underwriters Laboratories, Inc. as Type Z or ZW.

Product Features

  • Passes the vertical tray flame test requirements of UL 1581 at 70,000 Btu/hr. and ICEA T-29-520 210,000 Btu/hr.
  • Low surface friction provides easier installation.
  • Cold installation temperature in excess of -65°C.
  • Exceptional abrasion resistance will not cut or tear.
  • Lower smoke emission.
  • Chemically inert-unaffected by typical acids, bases, solvents and cleaning agents, fuels and hydraulic fluids.
  • High dielectric strength.
  • Low dielectric constant.
  • Special designs available that are qualified for nuclear generating stations in accordance with IEEE Standards 383-74 and 323-74.

Write Your Own Review

You're reviewing: Okozel Type Z

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Value
Quality