Solid Type PILC - Compact Sector

Solid Type PILC - Compact Sector
Specification

Applications

Okonite Paper Insulated Lead Covered 3/C cable is recommended for use in underground ducts, direct buried, and aerially when lashed to a messenger. PILC cables are used in any circuit that requires the highest reliability, the longest uninterrupted service life, and where the greatest surge, impulse and AC dielectric strength is desired. An added advantage is that a 3/C PILC cable permits the largest amount of power to be transmitted in the smallest diameter space because of its unique triangle shaped and nested design.
Although not shown as an insulation above 600 Volts in the National Electrical Code, it is readily approved for use by local inspectors because of its extensive safe use by utilities. Therefore, PlLC cables can be used in industrial or commercial applications with prior notification and approval by the local inspector.
Also available in other voltage ratings.

  Product Name
Length
Price (Per FT.)
 

101-63-4277 Solid Type PILC - Compact Sector - 2/0 AWG

FT.
Call 516-472-0650 for pricing

101-63-4335 Solid Type PILC - Compact Sector - 3/0 AWG

FT.
Call 516-472-0650 for pricing

101-63-4373 Solid Type PILC - Compact Sector - 4/0 AWG

FT.
Call 516-472-0650 for pricing

101-63-4436 Solid Type PILC - Compact Sector - 250 MCM AWG

FT.
Call 516-472-0650 for pricing

101-63-4553 Solid Type PILC - Compact Sector - 350 MCM AWG

FT.
Call 516-472-0650 for pricing

101-63-4544 Solid Type PILC - Compact Sector - 350 MCM AWG

FT.
Call 516-472-0650 for pricing

101-63-4666 Solid Type PILC - Compact Sector - 500 MCM AWG

FT.
Call 516-472-0650 for pricing

101-63-4665 Solid Type PILC - Compact Sector - 500 MCM AWG

FT.
Call 516-472-0650 for pricing

101-63-4904 Solid Type PILC - Compact Sector - 750 MCM AWG

FT.
Call 516-472-0650 for pricing

101-63-4986 Solid Type PILC - Compact Sector - 1000 MCM AWG

FT.
Call 516-472-0650 for pricing

Specification

Applications

Okonite Paper Insulated Lead Covered 3/C cable is recommended for use in underground ducts, direct buried, and aerially when lashed to a messenger. PILC cables are used in any circuit that requires the highest reliability, the longest uninterrupted service life, and where the greatest surge, impulse and AC dielectric strength is desired. An added advantage is that a 3/C PILC cable permits the largest amount of power to be transmitted in the smallest diameter space because of its unique triangle shaped and nested design.
Although not shown as an insulation above 600 Volts in the National Electrical Code, it is readily approved for use by local inspectors because of its extensive safe use by utilities. Therefore, PlLC cables can be used in industrial or commercial applications with prior notification and approval by the local inspector.
Also available in other voltage ratings.

Details

Insulation
Okonite's impregnated paper insulation consists of the finest electrical grade paper made from coniferous wood pulp and the purest grade polybutene dielectric fluid. The paper is manufactured to Okonite's specifications to produce the necessary mechanical and physical properties to resist tearing and wrinkling during manufacture and subsequent handling during installation conditions; and in addition, to assure properties of low dielectric loss with high dielectric strength. Okonite pretwists the sectors of 3/C cables before taping to virtually eliminate wrinkles at the cabling machine. To maintain a smooth, wrinkle-free precisely gapped tape insulation, Okonite carefully slits its own taping pads into widths tailored for each conductor size and wall thickness. Most important, Okonite has the latest taping machines with the most precise tape tension controls available today.
The impregnating fluids used are of medium viscosity (high viscosity optional) polybutene types, also manufactured to Okonite specifications. Polybutene dielectric fluids are better than natural petroleum based insulating fluids because they resist aging, have lower and more stable power factor values and possess an inherent tackiness which resists draining out of the paper tapes. Okonite's impregnation facilities clay-filter and degas the dielectric fluids to provide low power factors and stableionization levels from voltage stress.

Sheath & Jacket

Okonite's copper bearing lead sheath provides an impervious barrier from the environment; in addition, it provides mechanical protection for the insulation and encapsulation of the impregnant. All lead sheaths have the inherent capacity for substantial electrical conductivity, even under short circuit conditions without requiring a separate ground. Okonite's lead sheaths are applied with a continuous lead extruder under the control of a thickness gauge for uniform wall thickness and concentricity of extrusion.
The Okolene jacket provides mechanical and corrosion protection for the lead sheath and is used in most installations. (Indoor and aerial installations may not require a jacket). Okolene is a thermoplastic polyethylene material that resists most chemicals and moisture; it is unaffected by oils below 60°C and has a low coefficient of friction which aids pulling through ducts and conduits.

Specifications

Okonite PILC cables are manufactured in accordance with and meet the requirements of AEIC CS1-12 12th Edition.

Product Features

  • Pre-twisted conductors.
  • Polybutene impregnating fluid.
  • 90°C continuous operating temperature.
  • 110°C emergency rating.
  • 200°C short circuit rating.
  • High impulse strength.
  • Proven service life of over 60 years.
  • Impervious to environment.
  • Also available with LS/ZH Okoclear TP (TPPO) Okoseal (PVC) and ROC (Reinforced Okonite Covering).

Write Your Own Review

You're reviewing: Solid Type PILC - Compact Sector

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Price
Value
Quality