Price (Per FT.)
X-Olene Type RHH or RHW-2 or USE-2 600 Volt Power and Control Cables are recommended for general low voltage power and control applications. Where the National Electrical Code applies, Type RHH or RHW-2 or USE-2 may be used up to 90°C in dry or wet locations. These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, directly buried in the earth, or lashed to a messenger for aerial installation.
X-Olene is Okonite’s trade name for its chemically cross-linked polyethylene insulating compound with outstanding electrical and physical properties. Its excellent chemical physical resistance permits X-Olene’s use in areas exposed to alcohol, ketones and dilute acids and bases, without additional coverings
Conductor:Uncoated soft copper per ASTM B-3. Solid per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.
Insulation:Meets or exceeds all requirements of ICEA S-95-658, NEMA WC-70, and UL Standards 44 and 854.
Listed by Underwriters Laboratories, Inc. as Type RHH or RHW-2 or USE-2.
- Outstanding heat resistance.
- Rated 90°C wet or dry.
- Mechanically rugged.
- Stable electrical properties.
- Low moisture absorption.
- Highly resistant to weather and most chemicals.
- UL Listed.