Price (Per FT.)
X-Olene Type XHHW-2 600 Volt Cables are recommended for general low voltage power and control applications. Where the National Electrical Code applies, Type XHHW-2 may be used up to 90°C in wet or dry locations. These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, or lashed to a messenger for aerial installation
X-Olene is Okonite’s trade name for its chemically cross-linked polyethylene insulating compound with outstanding electrical and physical properties. Its excellent chemical physical resistance permits X-Olene’s use in areas exposed to alcohol, ketones and dilute acids and bases, without additional coverings
Conductor:Uncoated soft copper per ASTM B-3. Solid per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.
Insulation:Meets or exceeds all requirements of ICEA S-95-658, NEMA WC-70, and UL Standards.
Listed by Underwriters Laboratories, Inc. as Type XHHW-2.
- Small diameter, permits use of smaller conduit or more wires per conduit.
- Excellent heat resistance.
- Rated 90°C in dry or wet locations.
- Mechanically rugged.
- Stable electrical properties.
- Low moisture absorption.
- Highly resistant to weather and most chemicals.
- UL Listed.