Price (Per FT.)
• 8 AWG - 1 AWG
• Class B
• Stranded tinned copper per ASTM B-33 and B-8.
• Flame-Retardant Ethylene Propylene Rubber (EPR).
• ICEA Method 4, black and printed with conductor number.
• Uninsulated tinned copper per ASTM B33 and B.
• Black sunlight and moisture resistant flame-retardant themoplastic Chlorinated Polyethylene (CPE).
Tray Control Cable EPR/CPE 600V
Tray Control Cable is a type of Instrumentation Cable that is designed to help in power distributions for voltages not exceeding 600 volts. It has three copper conductors andagrounding wire, all of which are individually insulated with a flame retardant EPR (Ethylene Propylene Rubber). The cable is jacketed with a tough Chlorinated Polyethylene for maximum protection. This Instrumentation Cable is black color coded and has numbers for easy identification.
Tray Control Cable measures 6 AWG (American Wire Gauge) and ten feet long. The conductors are made of tinned and stranded copper wires in accordance to the ASTM B33 and B8. Tinning is the process of coating the copper conductors with a thin layer of tin metal. It helps in improving the chemical protection of the cable from corrosive industrial chemicals. Tinned conductors are also smooth and thus friction resistant. Stranding of the conductors enhances flexibility of the Instrumentation Cables. Copper is a good electrical conductor thanks to its low electrical resistance and good sagging effect.
Approvals and Certifications
Standards and certifications are rules and regulations set by the international standards organizations, which should be met by Cables. This cable is approved by the following:
• ASTM B33
• ASTM B8
• ICEA for Method 4
• National Electrical Code (NEC)
The Ethylene Propylene Rubber insulation is used to insulate this cable. It is non-conducting and creates a boundary between the grounding conductor and the live conductors. This eliminates any contacts that may arise betweenthem, which would cause short circuits thus improving the safety of this Tray Control Cable. EPR will also protect the user from electric shocks. It offers a superb mechanical and chemical protection to the cable from the harsh elements like abrasion, chemicalsand water. It’s also a flame retardant.
Chlorinated Polyethylene is used as jacketing material for this cable. It has ripcords installed under it. Ripcord offers a free strip during termination hence facilitating installation of this Tray Control Cable. The CPE prevents direct mechanical attacks on the cable. This improves the service life of the Tray Control Cable.
• This cable can be installed in both wet and dry environmental conditions through; raceway systems, direct burials, conduits and aerials.
• Interconnecting industrial machines
• Heating engines
• Wiring motors
Write Your Own Review
FAQ - Tray cable control 8 awg 750 awg
Will a tray cable control 8 awg though 750 awg having the smallest cable O.D. be suitable for purposes such as wet locations or direct burial?
Yes, as these cables are in accordance with NEC specifications in regard to wet and dry locations and also direct burial as per Class I, Div. 2 industrial hazardous locations. Moreover, it has the impact and crush requirements as that of Type MC Cable. In addition, it is lead-free and flame retardant even though the outer jacket will be less or equal to 60 mils.
What are the other notable qualities of tray cable control 8 awg 750 awg?
These cables have a flame retardant outer jacket and insulation, which is seen color coded as per ICEA Method 4. It is also resistant to sunlight, heat, cold, oil and grease. It is also permitted for ER or Exposed Run as per NEC specifications. It works well at 900C in dry locations and 75oC for wet locations.
How do I make the tray control cable totally moisture free in wet locations?
Care has to be taken during installation so that moisture does not get inside the cable, although the cables that we get from the market today are tightly packed with no possible space for moisture to seep through. However, when the ends are not sealed properly during installation, you can expect a little bit of moisture to collect.
Why does my cable have a ripcord?
The ripcord serves no other function than to make a neat slit in the outer jacket without damaging the wires inside. After the slit has been made, you can pull away the outer jacket to facilitate installation. Thus, there is hardly any damage done to the cable as well as the inside wires.
Is tray cable control 8 awg through 750 awg the right choice for outdoor and direct burial purposes?
There are many cables in the market along with the tray control cablewhich are well suited for outdoor uses and for direct burial. However, you can choose the tray cable control 8 awg through 750 awg when you want the smallest O.D. which gives you the strength, performance and long-life of cables with bigger O.D. The cables are well tested for all harsh conditions before they come to the market.
What is the unique quality that identifies a tray control cable?
These cables are specially designed for cable trays which are a support element for control, signaling and communication conductors. These cables are basically low-voltage or signal cables and so carry only a limited amount of electric current at a time. So the cables do not have to be spaced apart and they also do not have to be in a single row to dissipate heat.