Product Information

Specification

4 x 185 mm² Solid Bare Copper Unshielded Halogen-Free 0.6/1 kV YMz1K Cca Installation Cable

Allowable Ampacity for 4 x 185 mm² Solid Bare Copper Unshielded Halogen-Free 0.6/1 kV YMz1K Cca Installation Cable: 100 Amps

About:

This cable is designed for specific electrical installations requiring a halogen-free solution, which is safer in the event of a fire because it produces fewer toxic emissions. It's made from a single, solid copper conductor, which is known for its high electrical conductivity. The absence of shielding makes it simpler in design but may also make it susceptible to electromagnetic interference in certain conditions. Its designation and fire performance classification suggest that it's compliant with certain European standards or regulations, making it suitable for use in installations within the EU or other regions that recognize these standards.

Also Known As:

• Halogen-Free Power Cable
• 0.6/1 kV Copper Installation Cable
• 5-core YMz1K Cca Cable

Application:

• Halogen-free installation cable according to fire classification Cca-s1,d1,a1, for use in low-voltage installations up to 1 kV in buildings and functions with a high fire risk.

• Fixed mounting in sight, attached by means of brackets or on raised saddles, or in the ground in specially designed tubes, gutters or channels.

• Suitable for use in damp areas and can be installed under unfavorable conditions, such as elevated ambient temperatures, and in cable bundles.

Standards:

EN50575:2014+A1:2016

Construction:

• Conductor: Bare copper, ≤6mm ² : Solid, ≥10mm ² : stranded
• Insulation: Vulcanized Polyethylene (XLPE)
• Veins: Folded Together, filled into a round whole or wrapped with polyester foil
• Outer Sheath: Halogen-free compound, does not propagate fire

Features:

• Safety Emphasis: Being halogen-free, the cable releases fewer toxic and corrosive gases during combustion, which is safer, especially in areas with high human occupancy.
• Quad Conductor Design: The presence of four conductors offers flexibility for diverse applications, including four-phase electrical systems or setups requiring four separate signal or power paths.
• High Electrical Conductivity: Solid copper conductors ensure minimal resistance, leading to efficient power transmission with reduced losses.
• Environmentally Friendly: As a halogen-free cable, it's more environmentally responsible since it doesn't emit detrimental halogens when burned.
• Streamlined Design: Being unshielded, the cable might be more straightforward to handle and install compared to its shielded counterparts. However, potential susceptibility to electromagnetic interference in specific environments should be considered.
• Voltage Compatibility: Suitable for electrical setups or installations with a voltage up to 1 kV.
• Certified Fire Safety: With a Cca rating, the cable adheres to specific fire safety standards, ensuring reliable performance concerning flame spread, smoke generation, and heat release.

Specifications:

• Cores x cross-section: 4x185 mm²
• Outer Diameter approx. in: 49.2 mm
• Minimum Installation Temp.: -20°C
• Maximum Conductor Temp: +90°C (temporarily overloadable up to 130°C)
• Operating Temp: min. -40°C, max +80°C
• Mantle color: Gray
• Select: KEMA APPROVAL
• CPR classification: Cca-s1,d1,a1
• Rated Voltage: 0.6/1 kV
• Test stress: 3.5kV
• Weight kg/km: 7,770

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color