ALUMINUM SEU

ALUMINUM SEU

ALUMINUM SEU

  Product Name Length Price (Per FT.) Action
Product Name

8-8-8 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$0.54

Action

Product Name

6-6-6 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$0.67

Action

Product Name

4-4-6 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$0.73

Action

Product Name

4-4-4 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$0.73

Action

Product Name

2-2-4 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$0.87

Action

Product Name

2-2-2 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$0.95

Action

Product Name

1-1-1 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)
Call 516-472-0650 for pricing
Action

Product Name

1/0-1/0-2 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$1.45

Action

Product Name

1/0-1/0-1/0 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$1.52

Action

Product Name

2/0-2/0-1 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$1.64

Action

Product Name

2/0-2/0-2/0 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$1.74

Action

Product Name

4/0-4/0-2/0 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$2.24

Action

Product Name

4/0-4/0-4/0 ALUMINUM SEU CABLE

Length
FT
Price (Per FT.)

$2.44

Action

Specification

Application:

Aluminum SEU cable is primarily used as panel feeder in multiple unit dwellings and for branch circuits. Maximum operating temperature is not to exceed 90°C in wet locations. Voltage rating is 600 volts.

Conductors:

Aluminum SEU cable has a compact strand soft drawn 8000 series aluminum conductor, per ASTM B-801

Insulation:

Aluminum SEU cable has a type XHHW-2 cross linked polyethylene (XLP) insulation. The conductors are cabled together with a bare copper ground and covered with a reinforced binder tape.

Jacket:

Aluminum SEU cable has a gray sunlight resistance polyvinyl chloride (PVC) jacket.

Standards:

  • Ampacities based on National Electric Code, 2005 edition, section 310-15 
  • 60°C when terminated to equipment for circuits rated 100amps or less or marked for 14ga through 1ga conductors 
  • 70°C when terminated to equipment for circuits rated over 100amps or marked for conductors larger than 1ga 
  • 90°C wet or dry locations 
  • For dwelling units, conductors shall be permitted at listed Ampacities to be utilized as 120/240 volt, 3-wire, single phase service 
  • conductors that supply the total load 
  • UL 44, 854 
  • Federal Specification J-C - 30B